Whole-Home Electrification Planner
Electrifying a home isn't one project — it's a sequence. Do it in the right order and every upgrade makes the next one cheaper. Do it in the wrong order and you overspend on systems sized for inefficiencies you could have fixed first. This planner builds a personalized, Florida-specific roadmap across four stages: envelope, HVAC, solar + battery, and EV charger. Answer a few questions and we'll show you what to do first, what to do next, and which tools to run at each stage.
Home square footage
Home age
Current HVAC type
Water heater type
Attic insulation level
Do you own an EV or plan to buy one in the next 2 years?
Average monthly electric bill ($)
ZIP code
The Four Stages of Home Electrification
Stage 1 — Envelope (insulation + air sealing + duct sealing)
Before you electrify anything, reduce how much energy your home wastes. Envelope upgrades lower your heating and cooling load, which means every electrification upgrade that follows can be smaller, cheaper, and more effective. Most Florida homes should start here.
Stage 2 — HVAC (heat pump replacement)
Once your envelope is tight, replace aging gas or electric-resistance HVAC with a high-efficiency heat pump. In Florida's climate, heat pumps run efficiently year-round and pair perfectly with solar.
Stage 3 — Solar + Battery
With a reduced load and an efficient HVAC system, you can size solar accurately and add battery backup for outage protection. This is where electrification starts paying you back monthly instead of just reducing waste.
Stage 4 — EV Charger
Adding a Level 2 charger is the final stage because it depends on your panel capacity and solar production. Once solar is in place, charging your EV at home becomes dramatically cheaper than gasoline.
Why Order Matters
Homeowners who electrify out of order routinely overspend. Replacing HVAC before sealing ducts means paying for a larger system than necessary. Installing solar before envelope upgrades means over-sizing the array. Installing an EV charger before a panel upgrade means paying for a second electrician visit. This planner sequences your upgrades so each one reduces the cost of the next.
How to Use Your Roadmap
Each stage in your roadmap links to the specific tool that estimates savings for that upgrade. Run them in order, save your results, and bring them to your contractor consultations. If you want a single consolidated plan, request a free assessment and we'll build it with you.
Frequently asked questions
Related Tools
Stage 1 — Envelope
Stage 3 — Solar + Battery
Stage 4 — EV Charger
Fix Your Envelope First, Then Size Solar
Fix your envelope first, then size solar. Air sealing, insulation, and duct sealing reduce your cooling load — which means you can install a smaller, cheaper solar system.